Workpiece Center Presetter – STPS

Locates workpiece in a precentered orientation.

$ 6,250

Areas of Use:
Mount to:
Reference Systems

Capacity: 11″ x 11″

This presetter features gage arms to allow workpieces up to 11” x 11” to be centered. It is compatible with System 3R: Macro, MacroMagnum, & Matric systems.

The system is applicable to the following workholding solutions:

Direct to Reference System

The basic procedure is as follows:

  1. Measure workpiece with height gage.
  2. Set up planar gages to proper dimensions by using height gage.
  3. Place planar gages between workpiece and presetter arms.
  4. Align workpiece.
  5. Activate workholding mechanism.

This system allows for the centering & squaring of the workpiece within .002” quickly & efficiently