Stainless Steel Wire EDM Vise – GJVS7

  • Stationary jaw can be placed in 12 locations
  • Flat, parallel, and square within .0002″
  • Material: 440C Stainless Steel
  • Hardness: 58-60 RC
  • Deep frozen for stability

$ 2,695

Areas of Use:

The model GJVS7 consists of a solid main body with a stationary jaw that can be placed in 12 locations.  The moveable jaw is preset to the work piece dimension allow rapid part change over. The screw pushes the jaw block down at approximately 45°, which eliminates lifting of the jaw when clamping. A second moveable jaw is available for increased production on parts up to 2 5/16” each.

Five 8mm counter bored holes are provided on a 50mm centerline to facilitate mounting to most wire edm tables.  Manufactured of 440C  stainless steel, hardened and deep frozen for stability.

Jaw Opening: 7″
Length: 11 1/8″
Width: 3 3/4″
Height: 1″
Weight: 9 lbs.
Jaw Depth: 1″

Additional Resources