No products in the cart.

Stainless Steel Precision Vise 4” Capacity – VO-4S

  • Flat, parallel, and square within .0002″
  • Material: 440C Stainless Steel
  • Hardness: 58-60 RC
  • Deep frozen for stability

$ 1,740

Mount to:
Reference Systems

The model V0-4S consists of a one-piece base and stationary jaw, and a moveable jaw with quick acting, ratchet screw. The screw pulls the moveable jaw forward and down at approximately 45º. This eliminates lifting of the jaw when clamping small or thin work pieces.

Two counter bored holes are provided in both stationary and moveable jaw for mounting parallels or “V” shaped pads. The base also has four counter bored holes allowing the vise to be mounted.

Manufactured of 440C Stainless Steel then hardened and deep frozen for stability, the bottom is lapped flat and finish ground parallel, square to the lapped surface. The moveable jaw is individually fitted for accuracy.

Length: 6 ½”
Width: 2 3/8″
Height: 3″
Weight: 7.5 lbs.
Depth of Jaw: 1 ¼ ”
Jaw Opening: 0-4”